Inkbird Humidity Controller Wired Thermostat

• Humidity Controller:
• IBS-TH2(Only Temperature)

** Switch the modes between humidification and de-humidification automatically
** Control humidity by setting value and differential value
** Calibrate the humidity value
** Delay protection for control output
** Alarm when humidity exceeds high/low humidity setting value
** Alarm when sensor error or humidity exceeds the limit

• IOS and Android APP (Engbird) to monitor temperature ONLY at any time
• APP supports multi language , °C /°F mode and product with magnet base
• One phone can connect more than one IBS-TH2 at the same time. And one IBS-TH2 can be connected with more than one phone at the same time
• Support for application scenario selection and addition
• Alarm and data history view available.
• Battery is easy to replace

Work 1:To control humidifier
Work 2:To control dehumidifier

Specification:

• --Power Input: 120VAC, 50Hz/60Hz
• --Power Output: Max. 10A, 120V AC
• --Humidity Measuring Range : 5%-99.99%RH
• --Humidity Control Range : 5%-99%RH
• --Resolution: 1%RH
• --Accuracy: ±3%RH
• Input Power Cable Length: 1.5m (5ft)
• Output Power Cable Length: 30cm (1ft)

• Dimension: Body: 140x68x33mm (5.5x2.7x1.3inch)
• Socket: 85x42x24mm(3.3x1.7x1inch)
• Ambient Temperature : -30~ 75 ° C / -22~ 167 ° F
• Storage: Temperature : -30~ 75 ° C / -22~ 167 ° F ; Humidity 20~85% (No Condensate)

• ATTENTION:Since the upgradation of SDK (Software Development Kit) to the latest version 26,
• It is necessary to launch GPS to tag your position for scanning device, which are applicable to the version starting from 23.

• Temperature measurement range: -40℃~60℃/-40℉~140℉
• Temperature Accuracy: ±0.5℃/±0.9℉

Data Storage & Sampling Interval:

• Hold data for 20 days if the sampling interval is 1min, and the max date storage is 30000 points.
• Different sampling interval can be setting.(10s/ 30s/ 1min/ 2mins/ 5mins/ 10mins/ 30mins) The saving data time will be different if you choose different sampling interval.

Thermometer:

1.Waterproof IPX4 makes this thermometer ideal for a freezer or refrigerator to record temps

2. Magnet on the back, you could attach the sensor to a metal surface
Smart thermometer supports connected to multiple phones and reading multiple sensors with one cellphone

3. This smart thermometer supports connecting to multiple mobile phones, and one phone can read multiple sensors

4. Stores a maximum of 30,000 data points in the temperature sensor. Batteries not Included: Powered by 2 AAA batteries

• Humidity Controller:
• IBS-TH2(Only Temperature)

** Switch the modes between humidification and de-humidification automatically
** Control humidity by setting value and differential value
** Calibrate the humidity value
** Delay protection for control output
** Alarm when humidity exceeds high/low humidity setting value
** Alarm when sensor error or humidity exceeds the limit

• IOS and Android APP (Engbird) to monitor temperature ONLY at any time
• APP supports multi language , °C /°F mode and product with magnet base
• One phone can connect more than one IBS-TH2 at the same time. And one IBS-TH2 can be connected with more than one phone at the same time
• Support for application scenario selection and addition
• Alarm and data history view available.
• Battery is easy to replace

Work 1:To control humidifier
Work 2:To control dehumidifier

Specification:

• --Power Input: 120VAC, 50Hz/60Hz
• --Power Output: Max. 10A, 120V AC
• --Humidity Measuring Range : 5%-99.99%RH
• --Humidity Control Range : 5%-99%RH
• --Resolution: 1%RH
• --Accuracy: ±3%RH

• ATTENTION:Since the upgradation of SDK (Software Development Kit) to the latest version 26,
• It is necessary to launch GPS to tag your position for scanning device, which are applicable to the version starting from 23.

• Temperature measurement range: -40℃~60℃/-40℉~140℉
• Temperature Accuracy: ±0.5℃/±0.9℉

Data Storage & Sampling Interval:

• Hold data for 20 days if the sampling interval is 1min, and the max date storage is 30000 points.
• Different sampling interval can be setting.(10s/ 30s/ 1min/ 2mins/ 5mins/ 10mins/ 30mins) The saving data time will be different if you choose different sampling interval.